Heat Shield

Heat Shield

The heat shield is a specialized film designed to block heat, which is mounted on the windshield before the Dash Cam.

mceclip0.png

How does the Heat Shield work?

The heat shield reflects the direct sunlight from the windshield to help lower the dashcam's internal temperature.

This will help prevent overheating and provide extra protection if you happen to live in a sunny environment.

Compatibility

  • U3000
  • U1000Plus
  • Q1000
  • Q850

How to Install the Heat Shield 

1. After determining the installation location, wipe the installation location on the windshield with a dry cloth.

2. Attach the heat-blocking film to the installation location.

*Attach the heat-blocking film where the front camera will not be blocked.

mceclip1.png

3. Remove the protective film from the adhesive mount, and then press the mount to the heat-blocking film.


Push the mount against the windshield to ensure that the mount is firmly fixed.

mceclip2.png

4. Align the product to the mount, and then slide it into the locking position until you hear a click.

mceclip3.png

*The product may fall and be damaged during vehicle operation if it is not firmly fixed to the mount.
*If you need to remove the mount from the windshield to alter the installation location, be careful not to damage the windshield’s film coat.

5. Set the vertical angle of the camera appropriately.

mceclip4.png

*If the product and mount are not fully connected, the red part of the slide lock will show.

6. To confirm the camera angle, record a video after installation and check the video using the mobile viewer or the PC viewer. If necessary, adjust the camera angle again.

 

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.