What is the Battery Protection Setting?
All Thinkware Dash Cams feature the Battery Protection (Voltage Cut Off) Setting to ensure you will not return to the vehicle to a low or dead battery.
The Dash Cam will automatically power down once the vehicle's battery voltage level is lower than the selected value for more than 5 minutes.
Disclaimer
If the Vehicle's Battery Voltage level is lower than the selected Battery Protection value when entering Parking Mode, the Dash Cam will be unable to recognize this threshold and can drain the vehicle's battery completely.
Enable the Battery Protection Setting and Choosing the Battery Cutoff Voltage
1. Connect to the Dash Cam via Wi-Fi or Bluetooth
2. Select Dash Cam Settings > Record Settings
3. Ensure that you have enabled the desired Parking Mode.
4. Tap "Enabled" to turn on the Battery Protection Setting
5. Select your vehicle type and desired vehicle battery voltage cut-off
6. Tap the back arrow at the top-left to finalize your changes.
Note:
- Vehicles with a 24V Battery select from the 24V Section. The Dash Cam auto-detects which size battery you are using.
- The settings vary depending on the dash cam model
Enabling the Wintertime Battery Protection Setting
1. Connect to the Dash Cam via Wi-Fi or Bluetooth
2. Dash Cam Settings > Record Settings
3. Ensure the desired Parking Mode has been enabled.
4. Ensure the Battery Protection Setting has been enabled.
5. Check the months when you experience the coldest conditions.
*During the selected months, the dashcam will automatically turn off at 0.2V higher than the selected voltage cut-off.
6. Click on the back arrow at the top-left to finalize your changes.
Note:
- The settings vary depending on the dash cam model
Comments
0 comments
Please sign in to leave a comment.