Road Safety/Mobile Zone Settings

What is the Safety Camera and Mobile Zone Alert Settings?

The Safety Camera Setting enables the Dash Cam to warn you audibly about Red Light Cameras in your area.

The Mobile Zone Alert Setting enabled the Dash Cam to warn you audibly about the Speed Cameras and Mobile Speed Zones in your area.

*Applicable for the U3000, Q1000, U1000, Q800PRO, F800PRO, F800 and F790

*Applicable when paired with the GPS Accessory; F200PRO, F70PRO, X1000, X700, X800

How to Enable the Safety Camera Alerts

1. Connect to the Dashcam via Wi-Fi or Bluetooth

2. Select Dash Cam Settings > Road Safety Settings.

3. Under Safety Cameras select Enabled

4. Under Mobile Zone Alert select Enabled   

4. Tap the back arrow in the top-left to save your changes.

Note: The settings vary depending on the dash cam model

How to Enable the Safety Camera Alerts- PC/MAC

To enable these Settings follow the instructions below;

1. Remove the MicroSD Card from the Dash Cam

2. Using the Thinkware TransFlash Adapter, insert the MicroSD into your PC/Mac Computer.

3. Either open the PC/Mac Viewer or Windows and open the Settings.EXE file on the MicroSD Card.

4. Go to Road Safety Settings, and enable the desired settings.

5. Press "Save" to save the changes.

*[X700] accessible on the touchscreen menu

 

 

Was this article helpful?

0 out of 0 found this helpful

Have more questions? Submit a request

Comments

0 comments

Please sign in to leave a comment.